Remove Rear Panel; Removing The Dry Ice Container - Kärcher IB 7/40 Classic Servicehandbuch

4.2.2 Remove rear panel

1 Screw
Loosen 4 screws.
Lift the lid of the dry ice container and swing rear panel out-
ward.
1 Quick-action connection
Open the quick-action connection and pull off the compressed
air hose.
Unhook the rear panel from the tubular frame.
Installation: Align the lid (front gap of the lid), tighen the top
screws. Check gap.

4.2.3 Removing the dry ice container

Remove side panels.
Unscrew the yellow-and-green earth cable from the dry ice con-
tainer.
1 Fastening screws for dry ice container support
2 Dry ice container support
3 Dry ice container support
Unscrew 4 fastening screws for the dry ice container support.
Pull both supports fron the side out of the bearing.
Pull the dry ice container from the top out of the device.
Note
The shaker can remain connected. The dry ice container may be
placed on the device.
English 5.906-469.0 Rev. 00 (08/08)
9