Environmental Operating Conditions; General Operating Instructions; Cleaning, Service, Transport & Storage - Caframo BDC250 Bedienungsanleitung

ENVIRONMENTAL OPERATING CONDITIONS

The BDC250 stirrer must operate in the following conditions:
• Indoors
• Altitudes not exceeding 2000 meters
• Temperature from 41 to 104°F (5 to 40°C)
• Maximum relative humidity 80% for temperatures up to 87°F (31°C)
decreasing linearly to 50% relative humidity at 104°F (40°C)
• Pollution degree 2 in accordance with IEC 664 "Normally only
non-conductive pollution occurs. Occasionally, however, temporary
conductivity caused by condensation may be expected."

GENERAL OPERATING INSTRUCTIONS

The stirrer must be securely mounted as specified in the installation
instructions. Ensure the mixing shaft and blade are securely attached.
The stirrer is now ready for use to mix liquids.
Button Operation Functions:
Power Button - Turns the stirrer motor on and off.
When initially turned on, stirrer will spin at 50 rpm.
Increase Button - Increases the speed.
Decrease Button - Decreases the speed.
OL Indicates an overload condition. The load is too great for the
stirrer and must be reduced. To reset stirrer turn power off
and back on.
CLEANING, SERVICE, TRANSPORT & STORAGE
Cleaning
Using a mild soap and water solution, wipe the housing and control
panel of the stirrer with a damp cloth. Do not use chlorine bleach,
chlorine-based cleanser, abrasives, ammonia, steel wool, or scouring
pads with metal content or similar harsh solvents or abrasives. These
may damage the surface of the instrument.
Service
Do not attempt to service or repair a Caframo stirrer. If the stirrer
housing is opened, the warranty becomes void. Contact Caframo for
return authorization and return instructions.
6