Siemens Simatic net CP-5412 Installationsanleitung Seite 59

How to Configure
the Hardware
Configuring the
Software
Installationsanleitung CP-5412/Windows NT
C79000-B8274-C375-02
Once you have started the configuration program, follow the steps
outlined below:
Step
1 Click the "Select..." button.
2 Select a CP 5412 (A2) from the "Selection:" list box.
3 Click the "Install ->" button.
4 In the " Resources" dialog, you will see a pair of values,
for example 0240
entry. Note down the value which you will require to set
the I/O range on the CP 5412 (A2).
After you have selected the hardware parameters, you must configure
the software for the CP 5412 (A2).
Installation Instructions CP-5412/Windows NT
Procedure
0243 for the "Input/Output Range"
H - H
59