PeakTech 4390 Bedienungsanleitung Seite 75

4. Run the Setup.exe application in the CD, complete the
program installation according to the prompts of the
computer.
5. Press and hold down the meter´s "REL/USB" button for
about 2 seconds, the symbol "USB" appears on the meter´s
LCD display.
6.3. Operation Instruction
After the installation finishes, click EM6000.exe to run it, the
following windows appears.
It functions
like a digital
multimeter
Analog bar
graph
Data
recording
area
In figure 1, the Select a port combo box is for you to select the
desired port, it is not necessary for you to do any selection, just
press Connect button to connect to the multimeter. (Tip: The
application has the auto-identification function)
The left-top area is for displaying the measurement readings
through a digital play and a analog bar graph. The maximum
reading recorded and the minimum reading recorded are shown
below the bar graph at the same time.
-74-
It functions
like a needle
type analog
multimeter
Chart of the
recorded data