Touch Screen Calibration - Lenze EPM-H510 Betriebsanleitung

Show/Hide Bookmarks
4.1.1
L

Touch screen calibration

It is possible that you will be asked to calibrate the touch screen when you switch on the
!
module for the first time.
The calibration defines the positions of the sensitive fields on the display.
!
$ $ $ $
Note!
Ensure careful calibration of the display.
!
If the calibration is faulty or inexact, switch off the keypad and restart it before
!
you repeat the calibration.
What to do
1. Switch on the supply voltage for the keypad.
The unit is initialized.
&
2. Exactly touch field .
'
3. Exactly touch field .
Calibration is completed.
The transfer page appears.
EDBEPM-H510 DE/EN/FR 4.0
Commissioning
H510 TRANSFER PAGE H510 TRANSFER PAGE H510 TRANSFER PAGE
Graphic controller BOOT check: Graphic controller BOOT check: Graphic controller BOOT check:
Please touch bottom left Please touch bottom left Please touch bottom left
0 0 0
H510 TRANSFER PAGE
Graphic controller BOOT check:
Please touch top right
H510 TRANSFER PAGE
Graphic controller BOOT check:
Please wait
Port : NET
Driver : CAN Lenze M
Ver : 1.06
Addr : NO ADDRESS
Error : RESET
1
PROG
TRAN
PAGE
ESC
57