Panasonic CF-VDRRT2 Bedienungsanleitung Seite 25

You cannot play DVD-
Video discs.
DVD-Video sound and
images are not played
smoothly.
Check the manual of the DVD-Video play software and the
points listed below.
The drive may not have been selected if more than one
drive has been connected.
Play is not possible unless the region codes of the DVD-
Video disc, this drive and the play software match.
Check whether the region codes match.
Depending on the DVD recording system, some discs may
not be played automatically.
In this case proceed as follows.
First, start WinDVD, and insert the disc into the drive.
Select File from the WinDVD play menu, and play the
disc.
DVD-RAM and DVD-RW in the VR format can be played
only by the user with the administrator's authority.
In order to play DVD-R and DVD-RW, it must be finalized
(a process that enables it to play on other DVD players etc.).
The PC must meet certain system requirements in order for DVD-
Video discs to be played smoothly. Check the manual of the
DVD-Video play software and the points listed below.
If USB1.1 is used for the interface, the images and/or
sound may break up.
If another program has been started, exit it. When many
programs are started, the CPU may not have enough
capacity to handle all the ensuing operations.
Change the settings for the display area and colors. If
the display area and/or display colors are reduced, the
CPU capacity can be used more efficiently.
Check the CPU's speed setting. Some PCs may be set to the
power-saving mode in which the CPU has a low capacity.
Has the sound setting been set to muting?
E
25