Listening To The Dab Radio; Tuning In To A Dab Station - Teac R-5DAB Bedienungsanleitung

Entering DAB mode
1
Press the STANDBY/ON button to turn
the unit on.
The standby indicator lights off.
< The unit turns on with the source that was
last selected.
2
1
2
Press the FUNCTION button repeatedly
until "DAB" appears on the display.
The unit is switched to DAB mode.
When the unit is switched to DAB mode
for the first time, it will automatically run a
full scan to detect all DAB stations and save
them into its memory.
< Once the scanning is done, the DAB stations
will be displayed in alphanumeric order and
the first station in the list will be selected.
< If no station is detected or you want to
update the station list, run a full scan (see
page 18).
16 16

Listening to the DAB Radio

< If you want to select another station after
the scan is completed or while playing a
DAB station, turn the MULTI JOG knob until
the desired station appears on the display,
and then press the knob to determine your
selection.
Note: If no DAB signal is found in your area, try
relocating your R-5DAB unit.

Tuning in to a DAB station

In DAB mode, turn the MULTI JOG knob
until the desired station appears on the
display, and then press the knob.