Chauvin Arnoux C.A 6456 Bedienungsanleitung Seite 265

4.3.6 W WARNINGS OR ERROR REPORTS (EARTH MEASUREMENT IN LIVE CONDITION) WARNINGS OR ERROR REPORTS (EARTH MEASUREMENT IN LIVE CONDITION)
Preliminary remark: The complete list of coded errors is given in § 7.
Af Affichage - Indication Affichage - Indication
Hz
U > 25 (ou) 50V
C
Hz
<90 V
Hz
U > 25 (ou) 50V
NPE
< 15.3 Hz (ou) > 65Hz
U (ou) U (ou) U
LN NPE LPE
NO
rOd
Er10
U > 50V (ou) 25V
P
R > 15kΩ Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω
P
U
P
Er04
U > 50V (ou) 25V
F
Er05
Er06
I = ----
> 80°C
HOt
Press the TEST key to exit from the error conditions.
www.electronicaembajadores.com
Commentaire - Cause possible
V Volt Volt age > U between the TEST key and PE: the measurement TEST key and PE: the measurement TEST
L
is disabled.
One of the voltages, U or U is < 90 V : the measurement
LN LPE
is impossible.
U is AC and > U : the measurement is impossible.
NPE L
The frequency of U , U , or U
LN LPE
65 Hz : the measurement is impossible.
The rod is not connected, the measurement is stopped.
U > U : the measurement is disabled.
P L
Resistance of the auxiliary rod too high: the measurement
is stopped.
Connection of a current probe after selection of measurement Connection of a current probe af Connection of a current probe after selection of measurement
without tripping: the instrument automatically reverts to
measurement with tripping and reports the fact.
During the measurement, U exceeds the value set in the
F
SET-UP SET-UP SET mode: the measurement is stopped.
During a selective measurement, the product of the current
measured by the current probe and the measured voltage is
too low: the measurement is stopped.
During a selective measurement, the current measured by the
current probe is too unstable: the measurement is stopped.
The temperature of the instrument is too high: the masurement
is stopped. Pressing the TEST key has no effect until the
temperature of the instrument is again below 60°C; another
measurement can then be started.
69
is < 15,3 Hz or >
NPE
key has no ef key has no effect until the