Setup; Using Basic Menu - Yamaha RX-V359 Bedienungsanleitung

SETUP

The "BASIC MENU" feature is a useful way to set up
your system quickly and with minimal effort.
y
• If you wish to configure this unit manually using more precise
adjustments, use the detailed parameters in "SOUND MENU"
(see page 45).
• Altering any parameters in "SETUP" resets all parameters
manually adjusted in "SOUND MENU" (see page 45).
• Initial settings are indicated in bold under each parameter.

Using BASIC MENU

Note
Before you begin:
• Press SPEAKERS on the front panel repeatedly to select the
front speakers you want to use.
• Make sure you disconnect your headphones from this unit.
TEST
PROG
LEVEL
2-15
1
Press SET MENU.
SET MENU
"BASIC MENU" appears in the front panel display.
If the front panel display shows anything other than
"BASIC MENU", press SET MENU repeatedly until
"BASIC MENU" appears.
2
Press + to enter "BASIC MENU".
"1 SETUP" appears in the front panel display.
20
SETUP
STRAIGHT
VOLUME
PROG
MUTE
SET MENU
1
VOLUME
3
Press + to enter "1 SETUP".
"ROOM" appears in the front panel display.
4
Press +/– to select the desired setting.
Select the size of the room where you have installed
your speakers. In general, the room sizes are defined
as follows:
Choices: S, M, L
[U.S.A. and Canada models]
S (small) 16 x 13 ft, 200 ft
M (medium) 20 x 16 ft, 300 ft
L (large) 26 x 19 ft, 450 ft
[Other models]
S (small) 3.6 x 2.8 m, 10 m
M (medium) 4.8 x 4.0 m, 20 m
L (large) 6.3 x 5.0 m, 30 m
5
Press d to enter "SUBWOOFER" and then
press +/– to select the desired setting.
Choices: YES, NONE
• Select "YES" if you have a subwoofer in your
system.
• Select "NONE" if you do not have a subwoofer in
your system.
2 2
(4.8 x 4.0 m, 20 m )
2 2
(6.3 x 5.0 m, 30 m )
2 2
(7.9 x 5.8 m, 45 m )
2
2
2