Yamaha YDP-123 Bedienungsanleitung Seite 37

<Table 1>
MIDI Parameter Change table (SYSTEM)
Address (H) Size (H)
00 00 00 4
01
02
03
04 1
05 1
06 1
7E
7F
TOTAL SIZE 07
*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.
*2: Values from 28H through 33H are interpreted as -12 through -1. Values from 4DH through 58H are interpreted as +1 through +12.
<Table 2>
MIDI Parameter Change table (EFFECT 1)
Refer to the "Effect MIDI Map" for a complete list of Reverb, Chorus and Variation type numbers.
Address (H) Size (H)
02 01 00 2
02 01 40 2
• "VARIATION" refers to the EFFECT on the panel.
<Table 3>
MIDI Parameter Change table (MULTI PART)
Address (H) Size (H)
08 nn 11 1
nn = Part Number
• Effect MIDI Map
REVERB
MSB LSB
ROOM 02H 10H
HALL 1 01H 10H
HALL 2 01H 11H
STAGE 03H 10H
EFFECT
MSB LSB
CHORUS 42H 10H
PHASER 48H 10H
TREMOLO 46H 10H
DELAY 05H 10H
Data (H) Parameter
020C - 05F4(*1) MASTER TUNE
00 - 7F MASTER VOLUME
— —
34 - 4C(*2) TRANSPOSE
00 XG SYSTEM ON
00 RESET ALL PARAMETERS
Data (H) Parameter
00-7F REVERB TYPE MSB
00-7F REVERB TYPE LSB
00-7F VARIATION TYPE MSB
00-7F VARIATION TYPE LSB
Data (H) Parameter
00 - 7F DRY LEVEL
Description Default value (H)
-50 - +50[cent] 00 04 00 00
1st bit 3 - 0 bit 15 - 12 400
2nd bit 3 - 0 bit 11 - 8
3rd bit 3 - 0 bit 7 - 4
4th bit 3 - 0 bit 3 - 0
0 - 127 7F
-12 - +12[semitones] 40
00=XG sytem ON
00=ON (receive only)
Description Default value (H)
Refer to Effect MIDI Map 01(=HALL1)
00 : basic type 00
Refer to Effect MIDI Map 00(=Effect off)
00 : basic type 00
Description Default value (H)
0 - 127 7F
Appendix/Anhang/Annexe/Apéndice
YDP-123
37