Olympus DS-2200 Bedienungsanleitung Seite 33

9,11
8,10
9,11
.............................................................................................................................................................................
Notes
• The alarm playback function can be set for only one file at a time.
• The alarm will sound at the scheduled time every day unless the alarm playback setting is cleared.
• If you wish to change the file for alarm play, first turn the alarm settings "OFF", then make any desired new
alarm settings.
• The alarm will sound for 5 minutes and then stop.
• If the recorder is in use at the scheduled time, the alarm will sound after the operation is finished.
• The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play
the file associated with the alarm when you press any button.
• The alarm playback setting is cleared if the selected file is erased.
8
Press the FF or REW button to set
the hour.
12
9
Press the PLAY button to accept
the hour.
The minute indicator flashes.
10 Press the FF or REW button to set
the minute.
11 Press the PLAY button to accept
the minute.
12 Press the STOP button to close
the menu.
An alarm tone will sound at the scheduled time. Press any
button while the alarm sounds to play the file you associated
12 with the alarm.
To enable alarm sound only
8,10
To set an alarm without audio playback, set the alarm while
an empty folder is selected.
• Start setting from step 3 ( P.32) of "Alarm Playback
Function".
• When alarm sound goes at the preset time, pressing any
button stops the sound.
4
33