Radio Functions - Medion MD 80907 Bedienungsanleitung

Radio functions

Selecting the waveband
• Press the BD (21) button to change between the FM1, FM2 and FM3
frequency bands. You can store up to 6 stations in each band.
The three frequency bands all cover the same frequency range (
, which means that you can save up to 18 channels.
108 MHz)
Searching for a station
• Hold down one of the TUN/TRK/SKIP+/- (6) buttons for two seconds to start
searching for channels automatically. The device will search for the next
station automatically. Press one of the TUN/TRK/SKIP+/- (6) buttons to stop
searching for channels automatically.
• If you press one of the buttons briefly you can move the channel frequency up
or down manually.
Save station
• After the search function has found a station press one of the M1-M6 (14 19)
buttons for around three seconds. A beep will sound to indicate that the
station has been stored. You can save up to 6 stations in each bandwidth
(FM1, FM2 and FM3).
The device switches to normal channel display again after a few seconds.
Calling up stations
• Press the BD (21) button to select the frequency in which you have stored the
station.
• You can open one of the saved stations by pressing one of the M1-M6 (14 19)
station buttons.
Storing stations automatically (AP)
• Press the A.P. button (20) to play each saved station on a frequency for
around 5 seconds.
• Press the A.P. button (20) for around 2 seconds. The three frequencies are
searched for the six strongest stations and the stations found are saved in
programme spaces 1 6 for each frequency range. Then the station that is
saved in memory space 1 in frequency FM1 is played.
• Press one of the M1-M6 (14 19) buttons to stop searching.
MD 80907
Operation
GB
87.5 and
GB-13