Setup
Speaker Settings
Settings
Speaker Settings
Display
Audio
Level
Network
Distance
System
Test Tone
: Off
Language
Security
General
Support
Level
You can adjust the balance and level for each
speaker.
Adjusting Front/Centre/Surround/Subwoofer
Speaker Level
• The volume level can be adjusted in steps from
-6dB to +6dB.
• The sound gets louder as you move closer to
+6dB and quieter as you get closer to -6dB.
Settings
Display
Audio
Front L
◄
Network
Front R
:
Center
:
System
Surround L
:
Language
Surround R
:
Security
Subwoofer
:
Test Tone
:
General
Support
> Move < Change ' Return
32
English
HT-D5100_ELS_1224.indd 32
HT-D5100_ELS_1224.indd 32
Audio
|
> Move " Enter ' Return
Level
|
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
Off
Distance
If the speakers cannot be placed at equal
distances from the listening position, you can
adjust the delay time of the audio signals from the
front, centre, surround and subwoofer speakers.
•
You can set the Speaker Distance between
1ft(0.3m) and 30ft(9.0m).
Settings
Distance
Display
Audio
|
Front L
10(ft) 3.0(m)
◄
Network
Front R
: 10(ft) 3.0(m)
Center
: 10(ft) 3.0(m)
System
Surround L
: 10(ft) 3.0(m)
Language
Surround R
: 10(ft) 3.0(m)
Security
Subwoofer
: 10(ft) 3.0(m)
Test Tone
:
Off
General
Support
> Move < Change ' Return
Test Tone
Use the Test Tone feature to check the speaker
connections.
Press the ◄, ► buttons to select ON.
•
A test tone will be sent to Front L
Front R
Surround R
Subwoofer in order so you can make sure the
speakers are set up correctly.
To stop the test tone, press the ◄, ► buttons to
select Off.
Settings
Speaker Settings
Display
Audio
Level
Network
Distance
System
|
Test Tone
◄
On
Language
Security
General
Support
> Move " Enter ' Return
✎
NOTE
When HDMI Audio is ON (audio is produced
through TV speakers), the Test Tone
function is not available.
Center
Surround L
2011-12-24
2011-12-24
10:03:41
10:03:41