Zanussi ZWG 6120P Benutzerhandbuch Seite 21

• remove the filter and clean it under the tap;
The filter is inserted correctly when the indicator on
its top is visible and blocked.
• if necessary, place the
filter cover in the right
position again.
• open the filter cover
and insert the filter
again;
• close the filter cover;
• insert the mains plug
again.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, it takes a long
time to fill with water, the starting button flashes red or
the display (if available) shows the relevant alarm (see
chapter "What to do if..." for more details), check if the
water inlet filters are blocked .
To clean the water inlet filters:
• Screw the hose back onto the tap. Make sure the
connection is tight.
• Screw the hose back to the appliance and make
sure the connection is tight.
• Turn on the water tap.
• Turn off the water tap.
• Unscrew the hose
from the tap.
• Clean the filter in the
hose with a stiff brush.
• Unscrew the hose
from the appliance.
Keep a towel nearby be-
cause some water may
flow.
• Clean the filter in the
valve with a stiff brush
or with the piece of
cloth.
21