Attaching the front panel
Place hole A of the front panel onto the spindle
B on the unit, then lightly push the left side in.
Press (SOURCE) (or insert an MD) to operate
the unit.
Note
Do not put anything on the inner surface of the front
panel.
8
A
B
x
Setting the clock
The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1
Press (MENU), then press either side
of (DISC/PRESET) repeatedly until
"CLOCK" appears.
1 Press (ENTER).
The hour indication flashes.
2 Press either side of (DISC/PRESET)
to set the hour.
3 Press the (+) side of (SEEK).
The minute indication flashes.
4 Press either side of (DISC/PRESET)
to set the minute.
2
Press (ENTER).
The clock starts. After the clock setting is
completed, the display returns to normal play
mode.
Tips
• You can set the clock automatically with the RDS
feature (page 18).
• When D.INFO mode is set to ON, the time is always
displayed (page 21).