Sharp AN-60KT Service Anleitung Seite 9

Projector (Side View)
INPUT 1 terminal
Port for DVI digital, computer
RGB, and COMPONENT
signals.
INPUT 2 terminal
Terminal for connecting video
equipment with an S-VIDEO
terminal.
AC socket
Exhaust vent
Kensington Security
Standard connector
Using the Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Attaching the lens cap
After putting the lens cap strap on the lens cap, pass
the other end of the strap through the hole under the
projector, next to the lens, as shown in the illustration.
USB terminal
For connecting a computer
using a USB cable.
INPUT AUDIO terminal
Shared audio terminal for
INPUT 1, INPUT 2,
INPUT 3 and INPUT 4.
INPUT 3 terminal
For connecting video
equipment.
Wired remote contorl
input terminal (ø3.5 mm
minijack)
INPUT 4 terminal
For inserting a wireless
LAN PC card or a memory
card.
9
PG-M25X
Bottom View