Waste Disposal And Environmental Protection; Technical Data - FLORABEST FKS 2200 B1 Betriebsanleitung

Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Empty the oil tank carefully and hand in
your electric chainsaw at a disposal cent-
er. The plastic and metal parts employed
can be separated out and thus recycled
use can be implemented. Ask our Service-
Center for details (see P. 153 for the ad-
dress).

Technical Data

Electrical chainsaw ........... FKS 2200 B1
Rated input voltage..............230V~, 50 Hz
Input power . .................................. 2200 W
Safety class ....................................... / II
Chain speed ................................ 13.6 m/s
Weight
(without guide rail and chain)........... 4.7 kg
Weight (with guide rail and chain) ... 5.9 kg
Oiltank ............................................270 ml
Chain .............................Oregon 91P057X
Chrome cutting teeth, low-kickback
Chain bar ...Oregon 160SDEA041 (112364)
Chain link separation ......................10 mm
Chain width . ...................................1.3 mm
Teeth of the sprocket chain wheel ...........7
Length of the chain bar . ................460 mm
Sawing length ...............................395 mm
Acoustic pressure level
(L ) . .............98.0 dB(A); K
pA
Sound power level (L
measured ........ 108 dB(A); K
guaranteed . ................................112 dB (A)
Vibration (a )
n
front handle .........3.13 m/s
rear handle ..........3.49 m/s
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
GB
=3.0 dB(A)
pA
)
WA
=3.0 dB(A)
WA
; K=1.5 m/s
2
; K=1.5 m/s
2
2
2
23