Operating Determinations - Omnitronic KM Bedienungsanleitung

Unpacking
Please make sure that there are no obvious
transport damages. Should you notice any damages
on the connection panel or on the casing, do not
take the speaker system into operation and
immediately consult your local dealer
Slip Hazard
Please note that speaker systems could move due to
bass beats and vibrations. Furthermore, unintended
pushes from DJs, musicians or the audience present
further risk. This is why the speaker system must
always be secured against moving or the respective
area has to be blocked.
..............................................................................................................................................................................
2

OPERATING DETERMINATIONS

The passive monitors KM-110, KM-112 and KM-115 are suitable for professional applications on stage and
for amateur applications in smaller rooms.
Public and Industrial Use
Operating an amplification system in public or
industrial areas, a series of safety instructions have
to be followed that this manual can only give in part.
The operator must therefore inform himself on the
current safety instructions and consider them.
Maximum Power
The maximum power of the speaker system must
never be exceeded. When operating the speaker
system, please make sure that the loudspeakers
always sound well. When distortions can be heard,
either the amplifier or the loudspeaker is overloaded.
Overloads can quickly lead to amplifier or speaker
damage. In order to avoid damage, please reduce
the volume immediately when distortions can be
heard. When speaker systems are destroyed by
overload, the guarantee becomes void.
Admissible Temperatures
The ambient temperature must always be between
-5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
Installation
This speaker system must only be installed at a
solid, plane, anti-slip, vibration-free, oscillation-free
and fire-resistant location. Before installing the
system, make sure that the installation area can hold
a minimum point load of 5 times the system's load
(e.g. weight 20 kg - point load 100 kg). The speaker
system must never be installed higher than 100 cm
without secondary attachment. Speaker systems
may only be installed on top of other speaker
systems if the systems are protected against slipping
and flipping over (e.g. via appropriate clamping
belts). The speakers can be installed on top of a
subwoofer (satellite system). The carrying capacity
of the distance tube must never be exceeded. The
satellite system must always provide enough
stability. The subwoofer's base surface must always
be sufficiently dimensioned in relation to the top
speaker in order to prevent tilting over.
Prior to Switching on
Before the speaker system is switched on all faders
and volume controls have to be set to zero or
minimum position. Turn the amplifier on last and off
first!
.
Children
Keep away children and amateurs!
Maintenance and Service
There are no serviceable parts inside the speaker
system. Maintenance and service operations are
only to be carried out by authorized dealers!
Cleaning
Never use solvents or aggressive detergents in order
to clean the device! Rather use a soft and damp
cloth.
Modifications and Guarantee
Please consider that unauthorized modifications on
the speaker system are forbidden due to safety
reasons! If this speaker system will be operated in
any way different to the one described in this
manual, the product may suffer damages and the
guarantee becomes void. Furthermore, any other
operation may lead to dangers like crashes, hearing
loss etc.
WEEE Directive
8
When to be definitively put out of operation,
take the unit(s) to a local recycling plant for a
disposal which is not harmful to the
environment. Do not dispose of as municipal
waste. Contact your retailer or local
authorities for more information.