Connecting The Telephone; Wall Mounting - AUDIOLINE TEL106 Bedienungsanleitung

Commissioning

Connecting the telephone

Connect the telephone cable supplied to the telephone
socket and the upper jack on the rear side of the telepho-
ne ( ). Feed the cable through the respective cable
channel.
The telephone works using the tone dialling system (in
delivery state).

Wall mounting

Your telephone is also suitable for wall mounting. Use two
screws for fixing. Drill two holes vertically, 106 mm apart,
and leave the screws protruding from the wall by 5 mm.
Now place the telephone over the screws and push it
slightly downwards.
There is a small hanging device in the receiver rest to pre-
vent the receiver from falling when it is placed on the rest
with the telephone mounted on the wall. Insert a small
screwdriver or something suiteable to remove it, turn it
over and push it back in.
GB
33