Connecting Wires To Terminals - Kenwood KRC-591 Bedienungsanleitung

Connecting Wires to Terminals

Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
Connector Function Guide
Pin Numbers for
Cable Colour
ISO Connectors
External Power
Connector
A–4 Yellow
A–5 Blue/White
A–6 Orange/White
(KRC-691 only)
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2 Purple/Black
B–3 Gray
B–4 Gray/Black
B–5 White
B–6 White/Black
B–7 Green
B–8 Green/Black
Antenna Cord (ISO) 1
FM/AM antenna
input 3
Rear right
Functions
output (Red)
4
Battery
* 1
* 1 KRC-691/591
Ignition (ACC)
* 2
Battery wire (Yellow)
Power Control
* 2 KRC-591V :
Ignition wire (Red)
Dimmer
* 1 KRC-691/591
Ignition (ACC)
* 1
Ignition wire (Red)
Battery
*
2
* 2 KRC-591V :
Earth (Ground) Battery wire (Yellow)
Connection
+
Rear Right ( )
–
Rear Right ( )
+
Front Right ( )
–
Front Right ( )
A–4 Pin (Yellow)
+
Front Left ( )
Connector A
–
Front Left ( )
+
Rear Left ( )
Connector B
–
Rear Left ( )
10
Rear left
output (White)
Front left output
(White) 12
Fuse (10A)
2
Front right
Wiring harness
output (Red)
(Accessory1)
5
17
TEL mute wire (Brown)
6
7
If no connections are
made, do not let the wire
come out from the tab.
Power control/ Motor
antenna control wire
(Blue/White)
A–7 Pin (Red) 8
9
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
— 26 —
13
To KENWOOD disc changer/
DAB control input/
KPA-SD100/KPA-HD100/KPA-SS100 16
To connect these leads, refer
to the relevant instruction
manuals. 17
To Steering remote
(KRC-691 only) 30
16
Connect to the terminal that is
grounded when either the
TEL MUTE
telephone rings or during
conversation. 21
To connect the
KENWOOD navigation
system, consult your
navigation manual.
18
Connect either to the power
20
control terminal when using
P.CONT
the optional power amplifier,
ANT.CONT
or to the antenna control
terminal in the vehicle.
22
23