Sound Settings And Setup Menu; Changing The Sound Settings; Adjusting The Sound Characteristics; Enjoying Sophisticated Sound Functions - Advanced Sound Engine - Sony MEX-BT3900U Bedienungsanleitung

Sound Settings and Setup Menu

Changing the sound settings

Adjusting the sound
characteristics
1
During reception/playback, press the
select button.
2
Rotate the control dial until the
desired menu item appears, then
press it.
3
Rotate the control dial to select the
setting, then press it.
The setting is complete.
4
Press (BACK).
The display returns to normal reception/play
mode.
The following items can be set (follow the page
reference for details):
EQ7 PRESET (page 28)
EQ7 SETTING (page 28)
POSITION
SET POSITION (Listening Position setting)
(page 29)
ADJ POSITION*
adjustment) (page 29)
SET SW POS* 1 *
(page 29)
BALANCE
Adjusts the sound balance: "RIGHT-15" –
"CENTER" – "LEFT-15."
FADER
Adjusts the relative level: "FRONT-15" –
"CENTER" – "REAR-15."
DM+ (page 29)
RB ENH (Rear Bass Enhancer) (page 30)
SW LEVEL*
2 (Subwoofer Level)
Adjusts the subwoofer volume level: "+10dB" –
"0dB" – "–10dB."
("ATT" is displayed at the lowest setting.)
AUX VOL*
3 (AUX Volume level)
Adjusts the volume level for each connected
auxiliary equipment: "+18dB" – "0dB" –
"– 8dB."
This setting negates the need to adjust the
volume level between sources.
BTA VOL*
4 (Bluetooth Audio Volume Level)
(page 27)
28
1 (Listening Position
2 (Subwoofer Position setting)
*1 Hidden when "SET POSITION" is set to "OFF."
*2 When the audio output is set to "SUB-OUT"
(page 30).
*3 When AUX source is activated (page 31).
*4 When Bluetooth audio source is activated
(page 27).
Enjoying sophisticated sound
functions — Advanced Sound
Engine
Advanced Sound Engine, Sony's new sound
engine, creates an ideal in-car sound field with
digital signal processing. Advanced Sound
Engine contains the following features: EQ7,
Listening Position, DM+ Advanced, Rear Bass
Enhancer.

Selecting the sound quality

— EQ7 Preset

You can select an equalizer curve from 7
equalizer curves ("XPLOD," "VOCAL,"
"EDGE," "CRUISE," "SPACE," "GRAVITY,"
"CUSTOM" or "OFF").
1
During reception/playback, press the
select button.
2
Rotate the control dial until "EQ7
PRESET" appears, then press it.
3
Rotate the control dial until the
desired equalizer curve appears, then
press it.
4
Press (BACK).
The display returns to normal reception/play
mode.
To cancel the equalizer curve, select "OFF" in
step 3.
Tip
The equalizer curve setting can be memorized for
each source.
Customizing the equalizer curve
— EQ7 Setting
"CUSTOM" of EQ7 allows you to make your
own equalizer settings.
1
Select a source, then press the select
button.
2
Rotate the control dial until "EQ7
SETTING" appears, then press it.
3
Rotate the control dial until "BASE"
appears, then press it.
You can select an equalizer curve as a basis
for further customizing.