Safety Precautions - HERKULES S 390 HX Bedienungsanleitung

DESCRIPTION
1 Upper handles
2 Lower handles
3 Fastening knobs for upper handles
4 Collection bag
5 Oil filler cap
6 Oil drain plug
7 Deck
8 Blade height adjusting knob
9 Spark plug
COLLECTION BAG ASSEMBLY
ASSEMBLY
BLADE HEIGHT ADJUSTMENT
Move the lever (16) forwards.
Adjust the height of the blades by turning the knob (8) to the left to increase the working depth or to the right
to reduce it. (1 turn = 1 mm).
N.B.= make tha blades cut into the earth by about 3 mm.
Setting the working depth
Select the working depth depending upon the wear of blades and the state of the lawn. If the motor does not pull through
or even stops in scarifying, the wrong working depth has been selected.
In this case, reduce the working depth.
The motor must turn evenly.
Adjustment level per Step: 1 mm.
Adjustment level max: 10 mm
Adjustment level advised: 3 mm

SAFETY PRECAUTIONS

the engine is running.
Before scarifying the lawn, remove all foreign objects.
While mowing, stay alert for any foreign objects which
may have been missed.
During the engine start-up or operation, the operator
shall not lift the scarificator; should this be necessary, the
equipment shall be tilted so that the blades are on the
opposite side of the operator.
EN -
3
Always operate with the deflector or collection bag in the correct position.
Always stop the engine before removing the collection bag and adjusting the blade height.
Never place your hands or feet underneath the deck or into the grass discharge chute while
10 Fuel cap
11 Engine start-grip
12 Rear deflector
13 Throttle lever
14 Engine stop lever
15 Switch button
16 Blade operation lever
Never place your hands or feet underneath the deck or into
the rear discharge chute while the engine is running.
english