Specifications - Kenwood KDC-210UI Bedienungsanleitung

SPECIFICATIONS

FM Frequency Range
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
MW Frequency Range
Usable Sensitivity (S/N = 20 dB)
LW Frequency Range
Usable Sensitivity (S/N = 20 dB)
Laser Diode
Digital Filter (D/A)
Spindle Speed
Wow & Flutter
Frequency Response (±1 dB)
Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range
Channel Separation
MP3 Decode
WMA Decode
18
ENGLISH
87.5 MHz — 108.0 MHz (50 kHz space)
0.71 μV/75 Ω
2.0 μV/75 Ω
30 Hz — 15 kHz
64 dB
40 dB
531 kHz — 1 611 kHz (9 kHz space)
28.2 μV
153 kHz — 279 kHz (9 kHz space)
50.0 μV
GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
105 dB
90 dB
85 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
USB Standard USB 1.1, USB 2.0 Full Speed
File System FAT12/16/32
Maximum Supply Current DC 5 V
MP3 Decode Compliant with MPEG-1/2 Audio Layer-3
WMA Decode Compliant with Windows Media Audio
WAV Decode Linear-PCM
FLAC Decode FLAC file (Up to 48 kHz/16 bit)
Maximum Output Power 50 W × 4
Full Bandwidth Power 22 W × 4 (at less than 1 % THD)
Speaker Impedance 4 Ω — 8 Ω
Tone Action Bass
Middle
Treble
Preout Level/Load (CD)
(Except for
Preout Impedance
(Except for
Frequency Response (±3 dB) 20 Hz — 20 kHz
Input Maximum Voltage 1 000 mV
Input Impedance 30 kΩ
Operating Voltage 14.4 V (10.5 V — 16 V allowable)
Maximum Current Consumption 10 A
Operational Temperature Range –10°C — +60°C
Installation Size (W × H × D) 182 mm × 53 mm × 158 mm
Net Weight (includes Trimplate, 1.3 kg
Mounting Sleeve)
Subject to change without notice.
1 A
100 Hz ±8 dB
1.0 kHz ±8 dB
12.5 kHz ±8 dB
) 2 500 mV/10 kΩ
) ≤ 600 Ω