Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PRESET:
•
Analog Overdrive Enable - Enabled or disabled by amp model selection, after which this can
override.
•
Tweeter Enable - Enabled or disabled by cabinet model selection, after which this can override.
•
Tweak 1 & 2 - See table below.
GLOBAL:
•
MIDI Channel - Goes from 1 (matrix LED A1) to 16 (matrix LED D4). Footswitch / Sysex will
always work. Channel messages will be sent with this channel, and will be ignored upon receive
unless on this channel. (default = 1)
•
User on Powerup - Default is factory presets on powerup - LED off. Turn on for USER presets
on powerup.
•
Footswitch All-Info will be:
•
0 = Only shows LEDs of current mode (either greens or reds/yellows). Less info, less
confusing. [7:00/min]
•
1 = (default) Shows dim LEDs for the inactive mode (e.g. greens when NOT in EFX
mode). [12:00]
•
2 = Shows all LEDs bright in either mode. Good for seeing everything in brighter light
where the dim level could wash out. [5:00/max]
•
Bank Select Style will be
•
0 = (default) go to same preset in new bank [7:00/min]
•
1 = go to preset #1 in new bank [12:00]
•
2 = wait for user to press a preset footswitch before switching (current red blinks)
[5:00/max]
•
Noise Gate Sensitivity - Increase this to get more gating effect. Reduce to get a gentle
reduction. (default = 9:00)
•
Noise Gate Threshold - Set this while the bass volume is up but the strings are muted. Turn
Sensitivity up all the way, then turn this up until you hear the noise drop out. Then go up just a bit
more (one or two LED changes). Then reduce the Sensitivity to taste. (default = off)
TUNER:
•
Store Tuner Tweaks - Tuner will not remember your preferences unless you save them (just
press once).
•
Eb mode - Press to toggle between E and Eb mode. The LED will be lit for Eb mode. All notes
are moved up on the display - even in chromatic mode. We offer this since Eb tuning is so
popular in, well, popular music. (default = off)
•
Chromatic mode - Press to toggle between bass and chromatic mode. The LED will be lit for
chromatic mode. We offer this so you can use open tunings and not have to bring a separate
tuner. (default = off)
•
Tuner Volume - Turn up or down to change the bypass volume level while tuning. Turn all the
way down for silent tuning. (default = 0 - muted)
DETAILS
13
Werbung
Inhaltsverzeichnis
