Exposure To Radio Frequency Energy - LG W110 Benutzerhandbuch

Exposure to radio frequency energy

Radio wave exposure and Specific Absorption Rate (SAR) information.
This product has been designed to comply with applicable safety requirements for exposure to radio waves.
These requirements are based on scientific guidelines that include safety margins designed to assure the
safety of all persons, regardless of age and health.
The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption
•
Rate, or SAR. Tests for SAR are conducted using standardised methods with the product transmitting at its
highest certified power level in all used frequency bands.
While there may be differences between the SAR levels of various LG product models, they are all
•
designed to meet the relevant guidelines for exposure to radio waves.
The SAR limit recommended by the International Commission on Non-Ionizing Radiation Protection (ICNIRP)
•
is 2 W/kg averaged over 10g of tissue for the Mouth SAR or 4.0 W/kg averaged over 10g of tissue for the
Limb-worn SAR.
The highest SAR value for this model product when tested for use at Next-to-Mouth(Face) is 0.066 W/kg
•
(10g) and for Limb-worn(Wrist) is 0.444 W/kg (10g).
This device was tested for typical Limb-worn(Wrist) operations kept 0 cm between the user's body(Wrist)
•
and the back of the device. Additionally this device was tested for typical Next-to-Mouth(Face) operations
with the front of the device kept 1 cm between the user's mouth(Face) and the front of the device. To
ensure compliance with R&TTE SAR requirements, please ensure a minimum separation distance of 1 cm
is maintained for next-to-mouth (face) operations.
US/Canada declarations of conformity (Part15.105
statement)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
with radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference or television reception, which can be
determined by turning the equipment off and on, you can try to correct the interference by one or more of the
following measures:
8