To Erase A Track - Sharp MD-E9000H Bedienungsanleitung

Editing a Recorded MiniDisc (continued)

To erase a track

1
Press the MD button and load a MiniDisc (see page 15).
2
Whilst in the stop mode, select the track you want to erase using
the 5/3 5/3 or 2/4 2/4 button. Or start playing the track and then
5/3 5/3 5/3 2/4 2/4 2/4
press the MD 06 06 button.
06 06
06
3
Press the NAME/TOC button, and within 10 seconds, select
"ERASE" using the 5/3 5/3 or 2/4
5/3 5/3 5/3
4
Within 10 seconds, press the MEMORY/ENTER button.
To cancel the operation, press the MD
5
Press the MEMORY/ENTER button again.
The track is erased, and the unit is stopped at the beginning of the next
track.
6
To erase other tracks, repeat steps 1 - 5.
Notes:
When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.
When a track is erased, the track name will be erased at the same time.
This function cannot be used in the random play mode.
To erase programmed tracks (programmed
erase)
You can erase several tracks at once.
1 Programme them (steps 1 - 5, page 17).
2 Press the NAME/TOC button, and select "PRGM ERASE" using the 5/3 or
2/4 button.
3 When "PRGM ERASE?" appears, press the MEMORY/ENTER button twice.
*07-E34-38-MD9000H(SEEG) 38
2/4 button.
2/4 2/4 2/4
button.
To erase all of the tracks at once
1
Press the MD button and load a MiniDisc (see page 15).
2
Whilst in the stop mode, press the NAME/TOC button, and within
10 seconds, select "ALL ERASE" using the 5/3
button.
3
Within 10 seconds, press the MEMORY/ENTER button.
To cancel the operation, press the MD
4
Press the MEMORY/ENTER button again.
All of the track numbers and track names will be erased.
Note:
This function cannot be used in the random play mode.
Caution:
Once a track has been erased, it cannot be recovered.
Check the track number before erasing it.
01.4.19, 3:09 PM
MD-E9000H
5/3 or 2/4
5/3 5/3 2/4 2/4 2/4
5/3 2/4
button.
E-38
D
F
S
V
I
N
E