Korg padKONTROL Bedienungsanleitung Seite 11

■ Input Settings for Applications
If you're using the padKONTROL to control a DAW or similar
application, set the input port of your application to Port 2 so
that it will receive the MIDI controller messages you've
assigned to Port A on the padKONTROL.
padKONTROL
(MIDI IN) MIDI IN
Input (Port A) PORT A
(Port B) PORT B
(MIDI OUT Port) MIDI OUT (MIDI output settings:) Port 1
Output
(Dedicated Port) CTRL (MIDI output settings:) Port 2
■ Installing the Editor/Librarian software
To install the Editor/Librarian in Mac OS X, proceed as
follows.
1
Insert the included CD-ROM into your CD-ROM drive.
2
In the CD-ROM, navigate to the "padKONTROL" folder
which contains the Editor/Librarian software, and
double-click "padKONTROL Editor.pkg" to start up the
installer.
3
When the installer starts up, the following screen will
appear. Click [Continue].
4
"Important information" will appear. Read the contents,
and click [Continue].
5
"License agreement" will appear. Read the contents, and
click [Continue].
A dialog box asking your consent to the software license
agreement will appear. If you consent, click [I agree].
Names Displayed by Application
(MIDI input settings:) Port 1
(MIDI input settings:) Port 2
(MIDI input settings:) Port 3
11
padKONTROL Owner's Manual
6
The "Choose installation location" screen will appear.
Choose the desired installation location, and click
[Continue].
7
The "Easy Install" dialog box will appear. Click [Install].
8
When installation has been completed successfully, click
[Close] to exit the installer.