Care And Maintenance - CICLOSPORT CP 16is Bedienungsanleitung

part has been positioned correctly!
- It can occur that the processor is not correctly reset after
changing the battery. If this happens, meaningless
values, or no values at all, may appear on the display. In
this case, remove the new battery, wait approximately 20
seconds and reinsert the battery.
- Reset the personal values and those to be inserted.
If the battery is changed correctly, in accordance with the
instructions, the warranty is still valid.
transmitter belt battery:
Unscrew the battery cover in an anticlockwise direction
and remove the old battery. Fit a new CR2032 lithium
battery, with the positive pole facing upwards, and
replace the cover.
Dispose of batteries in a safe and responsible
manner.
36
CP16iS_engl.indd 16

8. CARe AnD MAIntenAnCe

Do not expose the device to direct sunlight, or to low or
high temperatures (below 0°C or above 50°C).
Keep the heart rate transmission belt clean:
Do not wash the transmitter belt in a washing machine,
due to the electrodes which are attached. To clean the
transmitter belt, wipe it carefully with a detergent for
synthetic fabrics. Do not dry in direct sunlight. The elastic
chest belt is washable, but it must be carefully dried before
use.
Rinse the transmitter belt under running water after every
use, especially after contact with salt water.
The watch should also be wiped with a moist cloth if there
has been contact with salt water or excessive sweat.
Ensure that no button is pressed when the device is in
contact with water.
10.04.12 14:22