Getting Started; Basic Operation; Detaching The Front Panel; Setup Menu - Pioneer MVH-290DAB Bedienungsanleitung

Getting Started

Basic operation

MVH-290DAB
M.C. (multi-control) dial
SRC (source)/OFF
MUTE
BAND/
DISP (display)
AUX input jack (3.5 mm stereo jack)
Frequently used operations
Purpose
Turn on the power*
Adjust the volume
Select a source
Change the display information
Return to the previous display/list
Return to the normal display from the menu Press and hold BAND/
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the
source off.
USB port
Display window
Detach button
Operation
Press SRC/OFF to turn on the power.
Press and hold SRC/OFF to turn off the
power.
Turn the M.C. dial.
Press MUTE to mute the unit. Press MUTE
again or turn the M.C. dial to unmute.
Press SRC/OFF repeatedly.
Press DISP repeatedly.
Press BAND/ .
.
Display indication
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when the button is pressed.
Appears when the local seek tuning function is set (page 10).
Appears when a traffic program is received.
Appears when the TA (traffic announcements) function is set (page 10).
Appears when the sound retriever function is set (page 10).
Appears when random/shuffle play is set.
Appears when repeat play is set.
Appears when the iPod control function is set (page 7).

Detaching the front panel

Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.

Setup menu

When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the
display.
1
Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set
at this time, turn the M.C. dial to select [NO], then press to confirm.
Attach
3
En