Setting The On-Screen Display Language; Updating The Software Of This Unit - Yamaha BD-S1065 Bedienungsanleitung

indicator
Lights up when playing back disc or title
REP ALL
repeatedly.
Lights up when playing back a section
REP A-B
repeatedly.
Adjusting the brightness of the front
panel display
If you feel that the front panel display is too bright when
watching movies, you can adjust the brightness by
pressing DIMMER repeatedly on the remote control.
■ Setting the on-screen display
language
TOP MENU/TITLE LIST
EXIT
STATUS
ON SCREEN
SETUP P in P
1 Press SETUP to display the Setup Menu screen.
S E T U P
2 Press
/ / / to select "On Screen
Language", then press ENTER.
Displays The Title List
On Screen Language
3 Press
/ to select the language you want to
display on the screen, then press ENTER.
English
Descriptions
POP UP MENU
ENTER
RETURN
SLOW/SKIP
SEARCH
REPEAT OFF
Settings
Picture
Note
– To select the DVD disc language, such as subtitle
language, etc., see page 26.

■ Updating the software of this unit

Some of the newly released BD video discs cannot be
played back unless you update this Player software to the
latest version. We recommend updating the software of
this unit with "Software Update" so that this Player is
operated based on the latest software.
The USB memory device must be clear of all files
except software update data to allow new software
uploading.
To check for the availability of a software update, visit
http://www.yamaha.co.jp/english/product/av/down/
agreement.html.
When a software update is performed, the software
update data must be written onto the USB memory
device in advance using a PC. When software update
data is released, copy the data onto a USB memory
device after downloading it to a PC. Delete unneeded
software update data using a PC after the software
update process is completed.
1 Insert the USB memory device with the update file into
the USB BD STORAGE/SERVICE terminal on rear of
this Player.
2 Press SETUP to display the Setup Menu screen.
3 Press
/ / / to select "Settings", then press
ENTER.
4 Press
/ to select "Software Update", then
ENTER.
– If you have not yet set the password, go to step 6.
5 Enter the 4-digit number using 0-9.
Enter 4-digit password
6 Press ENTER to start checking data in the USB
memory device.
Insert USB memory device containing
the software update file.
7 During the data checking, "Checking" blinks.
Now checking the data in USB memory device.
Checking
Before Starting Playback
OK
17
3
En