Initial Operation - Metabo ASA 25 L PC Originalbetriebsanleitung

Caution! Do not use the appli-
ance until you have read the
Operating Instructions.
WARNING - Operating personnel
must receive adequate instruction
in the use of this vacuum cleaner
and in the materials for which it is
used.
Warning sign for machines with
dust class L:
While the appliance is suitable for
extracting substances that pose a
slight threat to health, it is not
appropriate for reducing wood dust
in inhaled air.
Dust from material such as paint
containing lead, some wood
species, minerals and metal may
be harmful. Contact with or
inhalation of the dust may cause
allergic reactions and/or
respiratory diseases to the
operator or bystanders.
Certain kinds of dust are classified
as carcinogenic, such as oak and
beech dust, especially in
conjunction with additives for wood
conditioning (chromate, wood
preservative).
5. Overview
See page 3.
1 Switch On/Off/Automatic operation/
2 Plug socket for power tool
3 Upper part
4 Button for filter cleaning 'PressClean' (PC)
5 Exhaust port
6 Snap lock
7 Suction opening
8 Container
9 Fleece filter bag *
10 PE filter bag *
11 Pleated filter
12 Filter cage
* depending on equipment/not included in scope of
delivery

6. Initial Operation

Before plugging in the appliance, check
that the rated mains voltage and mains
frequency, as specified on the rating label,
match your power supply.
Attach the handle connecting piece or coupling to
the suction hose (see illustration A, page 2.).
Prepare the suction tube as shown for storage in the
repository (see illustration C, page 2.).
6.1 Inserting a Fleece Filter Bag (9)
Switch off appliance. Unplug mains cable. Ensure
the plug cannot be reconnected accidentally. Open
the snap locks (6). Remove the upper part (3) from
the container (8).
See illustration B, page 2. Holding the new filter bag
by the flange, push it together with the rubber
diaphragm over the suction connection. Ensure that
the rubber diaphragm is fitted over the thicker
section.
Replace the upper part of the appliance on the
container and close the snap locks.
6.2 Inserting a PE Filter Bag (10)
Switch off appliance. Unplug mains cable. Ensure
the plug cannot be reconnected accidentally. Open
the snap locks (6). Remove the upper part (3) from
the container (8).
See illustration B, page 2. Holding the new filter bag
by the flange, push it together with the rubber
diaphragm over the suction connection. Ensure that
the rubber diaphragm is fitted over the thicker
section.
Spread out the PE filter bag (10) evenly across the
container floor. Arrange the edges of the PE filter
bag around the container rim so that the bag is firmly
clamped on all sides by the attached upper part (3).
Replace the upper part of the appliance on the
container, close the snap locks.
7. The Appliance
7.1 Switching On/Off, automatic operation
Select operating mode on switch (1):
0 = Vacuum cleaner off
I = Vacuum cleaner on (manual operation)
= Automatic On/Off switch:
The vacuum cleaner is switched on or off
by means of a power tool connected to the
mains socket (2).
7.2 PressClean
See illustration E, page 2. To clean the pleated filter
(11) using a strong air flow: Press the button (4)
ENGLISH en
13