Operating An Audio Device With This Unit; Initializing Bluetooth Settings - Sony MEX-BT3000 Bedienungsanleitung

2 Press  repeatedly until
"BT AUDIO" appears.
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Changing display items
Press .
Adjusting the volume level
The volume level is adjustable for any
difference between the unit and the
Bluetooth audio device.
1
Start playback of the Bluetooth audio device
at a moderate volume.
2
Set your usual listening volume on the unit.
3
Press the select button.
4
Rotate the control dial until "BTA VOL"
appears, and rotate the volume control dial
to adjust the input level ("+18dB" – "0dB" –
"– 8dB").
Operating an audio device
with this unit
You can perform the following operations
on this unit if the audio device supports
AVRCP (Audio Video Remote Control
Profile) of Bluetooth technology. (The
operation differs depending on the audio
device.)
To Do this
Press / (ALBUM /)
Skip albums
[press once for each album]
Press  (REP)*
Repeat play
Press  (SHUF)*
Shuffle play
Press  (PAUSE)*
Play
this unit.
Press  (PAUSE)*
Pause
this unit.
Skip tracks
Reverse/
Fast-forward
*1 Press repeatedly until the desired setting
appears.
*2 Depending on the device, it may be necessary
to press twice.
Operations other than the above should be
performed on the audio device.
Notes
• Depending on the audio device, information,
such as title, track number/time, playback
status, etc., may not be displayed on this unit.
The information is displayed during Bluetooth
audio playback only.
• Even if the source is changed on this unit,
playback of the audio device does not stop.
Initializing Bluetooth
Settings
You can initialize all the Bluetooth related
settings (pairing information, phonebook,
call history, preset number, device
information, etc.) from this unit.
Press and hold  for 1
1
second to turn off the power.
2
Press and hold the select button.
The menu list appears.
3
Rotate the control dial to select "BT
INIT," then press it.
1
The confirmation appears.
1
4
on Rotate the control dial to select "INIT-
2
YES," then press it.
"INITIAL" flashes while initializing the
on
2
Bluetooth settings; "COMPLETE"
appears when initializing has finished.
Press  –/+ (/
) [press once for each
track]
Press and hold  –/+
(/) [hold to
desired point]
19