KULZER iBOND Self Etch Gebrauchsanweisung Seite 15

2. Bonding of indirect restorations in combination with a light-curing luting cement:
porcelain, Polyglas
2.1. Pre-treatment of restoration
• Pre-treat the bonding surface of the indirect restoration according to the manufacturer's
instructions.
2.2. Dispensing and application of iBOND Self Etch
Light-cure the adhesive prior to application of the luting cement.
• Proceed as described in 1.
• Apply and process luting cement according the manufacturer's instructions. The luting
cement must be completely light-cured after insertion of the indirect restoration.
3. Sealing hypersensitive areas of teeth.
3.1. Cleaning the tooth
• Clean tooth with an oil and fl uoride-free polishing paste.
3.2. Dispensing and application of iBOND Self Etch
• Proceed as described in 1.
• Carefully remove oxygen-inhibited layer with an alcohol-soaked pellet after light-curing.
®
and composite restorations (inlays, onlays, veneers, crowns).
15