Installation - BURG WÄCHTER Door eGuard DG 8200 Bedienungsanleitung

Installation:

1 Slide the lid upwards to open, as shown in diagram.
2 Put in the batteries according to the "+" "­" sign
on the lid.
3 Take the reverse steps to close the lid.
Vorsicht:
1. DO NOT force when opening and closing the lid to
avoid lid damage.
2. DO NOT press the lid to the opposite direction when
opening to avoid any lid damage.
3. When the low battery indicator is on, please replace
all batteries to avoid any damage to this product by
battery weeping.
When the batteries run out, the low battery indicator
will flash to remind users to replace the batteries.
The following types of batteries can be used in this
product: AAA, 1.5 V alkaline battery. Any abandoned
batteries should be disposed according to local
environment protection rules and regulations.
24 | English Door eGuard