Grasslin talento smart Betriebsanleitung Seite 59

Random programming
E
Menu Menü
OK
Program
Programm
OK
New
Neu
With Date? OK
Mit Datum?
Yes/No
Ja / Nein
Random programming is possible only in advanced mode .
Example: Random  15:00  +02:00  1 2 3 4 5  1
Channel 1 is switched on Monday to Friday between 15:00 and 17:00. The exact switch-on time point is
random in this range .
1 . Press the button:
Menu
2 . Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3 . Select and confirm with
New
4 . In step
With date
- confirm with (also refer to Page 51) .
OK
5 . Select or
Random ON
NOTE: The period of the random switching is defined with ± 2 hours.
6 . Enter hour and minute of the start (+/-) and confirm each with
7 . Enter hour and minute of the range of the random programming (+/-) and confirm each with
8 . Set weekday on which the device should randomly switch and confirm with
1-5, 6-7 and 1-7 are preset . Individual weekdays can be set (+/-) under "Select days" .
9 . Set the channel which is to be programmed, and confirm with
(1)
NOTE: The plus sign stands for active, the minus sign for an inactive channel .
10 . And choose possible
The channel selection is only available with 2-channel timers .
(1)
The choice of priority is only possible in advanced mode; refer to "Defining prioritisation of programs"
(2)
on Page 60 .
OK
Select FNC
FKT wählen
Random ON/
Zufall EIN
Time
Zeit
15:00
15:00
Hour Stunde ...
Offset Zeitraum
+02:00 +02:00
Stunde ... Hour ...
Days
Tage
12345--
12345--
Mo-Fr
Mo–Fr
OK.
.
OK
determine whether the device should be activated on a certain date and - if yes
and confirm with
Random OFF
.
Priority
(2)
Kanäle Channels
1 – 1 –
OK CH1 CH1
OK
OK
.
OK
.
OK
.
OK
OK
(1) (1)
OK
Add Time?
Weitere Schaltzeit
Yes/No
Ja/Nein
OK
Priority Priorität
(2) (2)
Low Niedrig
.
OK
. NOTE: The weekdays
OK
59
EN