Technical Data; Noise/Vibration Information - Berner BACJS 10,8 V LI Originalbetriebsanleitung

OBJ_BUCH-2438-002.book Page 16 Thursday, March 5, 2015 7:08 PM
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the work-
piece. It is suitable for straight and curved cuts with
mitre angles to 45 °. The saw blade recommenda-
tions are to be observed.
The light of this power tool is intended to illuminate
the power tool's direct area of working operation
and is not suitable for household room illumination.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Battery pack
2 Battery unlocking button
3 "PowerLight" button
4 Thumbwheel for stroke rate preselection
5 Battery charge-control indicator
6 Temperature control/overload protection
indicator
7 On/Off switch
8 Adjusting lever for orbital action
9 Base plate
10 Guide roller
11 Stroke rod
12 Plastic sliding shoe
13 Lead for the parallel guide
14 Saw blade*
15 Extraction hood
16 "PowerLight"
17 Handle (insulated gripping surface)
18 SDS clamping lever for saw blade release
19 Contact protector
20 Vacuum connection
21 Vacuum hose*
22 Splinter guard
23 Nose plastic sliding shoe
24 Screw
25 Scale for mitre angle
26 Locking screw for parallel guide*
27 Parallel guide with circle cutter*
28 Centring tip of the circle cutter*
29 Hex key
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
16 | English

Technical Data

Cordless Jigsaw
Art. No.
Rated voltage
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to
EPTA-Procedure 01/2003
Permitted ambient
temperature
– during charging
2)
– during operation and
during storage
Recommended batteries BACP 10,8V S-B x.x Ah
Recommended chargers
1) depending on the battery pack being used
2) Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined
according to EN 60745-2-11.
Typically the A-weighted noise
levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector
h
sum) and uncertainty K determined
according to EN 60745:
Cutting board:
a
h
K
Cutting sheet metal:
a
h
K
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
BACJS 10,8 V LI
215869
V= 10.8
-1
min 1500–2800
mm 18
mm 70
mm 3
mm 3
° 45
1)
kg 1.5
°C 0...+45
°C –20...+50
BACC 10,8 V S
BACJS 10,8 V LI
dB(A) 77
dB(A) 88
dB 3
2
m/s 5.5
2
m/s 1.5
2
m/s 5.0
2
m/s 1.5
1 619 P12 703 • 5.3.15