Installation; Installation Conditions; Installation Angle; Mounting Location - Endress+Hauser Oxymax COS22 Kurzanleitung

Installation

As the user, you are responsible for complying with the following safety conditions:
• Installation instructions
• Local prevailing standards and regulations.
NOTICE
Use in not specified applications
Measurement errors and failures up to the breakdown of the measurement point possible
► Only use the product acc. to it's specification.
► Note the technical data of the nameplate.
6 Installation
6.1

Installation conditions

6.1.1 Installation angle

Not permissible!
Fig. 4: Permitted angle of installation

6.1.2 Mounting location

• Select the installation location so that there is easy access for later calibration.
• Make sure that upright posts and assemblies are secured safely and vibration-free.
• Select an installation location which produces a typical oxygen concentration.
10
Permissible angle of installation
10°
Oxymax COS22/COS22D
10° Not permissible!
a0005584-en
Endress+Hauser