Connecting / Disconnecting Belt Clip And Neck Strap - Philips SCD489 Bedienungsanleitung

2 Briefly press the play/stop button (2 9, A-9) to play the
selected lullaby.
• Briefly press the OK button (B-7) on the parent unit to
interrupt playback of the lullaby. Press the OK button (B-7)
on the parent unit again to restart playback of the lullaby.
> If the lullaby is not restarted within 60 seconds, the lullaby
function will switch off automatically.
• Briefly press the play/stop button (2 9, A-9) on the baby unit
again to stop playback of the lullaby.
Note: If you press the lullaby button ( , A-8) too long, no
lullaby will be selected.
Connecting / disconnecting belt clip and
neck strap
If the parent unit is operated using batteries, you can carry it in
and around your house, allowing you freedom of movement
while still monitoring your baby.
Connecting the belt clip
• Insert the little spindle on the rear of the belt clip into the
recess (B-11) on the rear of the parent unit.
Twist the belt clip to the left until it clicks in position.
Disconnecting the belt clip
• Twist the belt clip to the right (TURN 2) and take it off.
Connecting the neck strap
• Insert the little spindle at the end of the neck strap into the
recess (B-11) on the rear of the parent unit.
Twist the spindle to the left until it clicks in position.
Other features
EN
13