Adjusting The Parquet/ Carpet Brush; Operation - Beko VCO 42701 AB Bedienungsanleitung

3 Usage
3.5 Adjusting the parquet/
carpet brush
Press the adjustment latch (10) located on the
parquet/carpet brush (11) and;
• Vacuum on firm ground and parquet; extend the
brush before vacuuming.
• Vacuum on carpets and rugs; retract the brush
before vacuuming.
3.6 Adjusting the suction
power
You can adjust the suction power of the appliance
according to the type of the surface to be cleaned.
You can turn the suction power adjustment knob
(2) found on the appliance' s body clockwise to
increase the suction power. Turn the suction
power adjustment knob anti-clockwise to
decrease the suction power.
There are four settings for suction power:
• Turn the suction power adjustment knob (2)
towards the carpet icon to clean carpets.
• Turn the suction power adjustment knob
towards the eco icon to clean curtains,
tablecloths and sofas.
• Turn the suction power adjustment knob
towards the parquet icon to clean hard surfaces.
8 / EN
• Turn the suction power adjustment knob
towards the MAX icon to clean heavily soiled
hard surfaces and carpets.

3.7 Operation

1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
WARNING: Stop pulling the
appliance cable when it comes to
A
the yellow mark located on it. After
the yellow mark, the red mark will
come. Do not pull any more after
reaching the red mark.
2. Use the suction power adjustment knob (2)
found on the appliance to set it to the desired
suction power (see 3.6).
3. Press the on/off button (1) to switch on your
appliance.
3.8 Accessories
Accessories have been designed in one piece to
save space and provide practical use.
Upholstery tool
1. Grasp it from the dust brush area and pull it
backwards slowly.
– A click will be heard, indicating that the
button on the body has seated into its slot.
2. Attach the end of the handle or the telescopic
tube (13) to the inner side of the dust brush.
– You can now start vacuum cleaning.
3. Pull the accessory to remove it when the
process is complete.
Vacuum Cleaner / User Manual