Gardenline YGL N.G. 5351 Originalbetriebsanleitung Seite 35

m CAUTION! If the machine has not cooled down suffi-
ciently, the fuel could ignite during refuelling and cause
severe burns.
• Ensure that the tank is not overfilled. If you spill any
fuel, it has to be wiped away immediately and the ma-
chine must be cleaned.
• Always close the screw plug on the fuel tank proper-
ly, so loosening is prevented from vibrations during
operation.
m DANGER
Never refuel the machine close to an open flame.
Special safety regulations for the use of
internal combustion motors
m DANGER
Internal combustion motors are a particular danger dur-
ing operation and refuelling. Always read and follow the
warnings. Non-compliance can lead to severe and even
lethal injuries.
1. Do not make any modifications to the machine.
2. m CAUTION!
Risk of poisoning, Exhaust fumes, fuel, Lubricating
oil vapor, sawdust and lubricants are poisonous. Ex-
haust fumes must not be inhaled.
3. m CAUTION!
Risk of burns!, Do not touch the exhaust system
and the drive motor.
4. Do not use the machine in unventilated rooms or
easily flammable environments.
5. m Risk of explosion!
Never use the machine in rooms with easily flamma-
ble substances.
6. During transport, secure the tool against sliding and
tilting.
7. Ensure that no fuel is spilled on the motor or the ex-
haust during refuelling.
8. Repairs and setting work must be carried out by au-
thorised specialists.
9. Do not touch mechanically moving or hot parts. Do
not remove protective covers.
10. The values specified in Technical Data under sound
power level (L ) and sound pressure level (L
wA
emission levels and do not necessarily represent
safe working levels. As there is a connection be-
tween emission and immission levels, it cannot be
used reliably to determine potentially required, addi-
tional safety measures. Factors influencing the cur-
rent employee's immission level include characteris-
tics of the working environment, other noise sourc-
es etc. such as the number of machines and other
nearby processes and the time frame the user is ex-
posed to the noise. The reliable immission level can
also vary by country.
However, this information will give the machine's us-
er the opportunity to carry out a better risk assess-
ment.
11. Never put objects into the venting slots. This also ap-
plies when the machine is turned off. Non-compli-
ance can cause injuries or damage to the machine.
12. Keep the tool free from oil, dirt and other contami-
nants.
13. Ensure that sound absorbers and air filters function
properly. These parts act as flame protection in the
event of misfire.
14. Turn off the motor:
- Whenever you leave the machine
- Before refuelling.
15. Never use the choke lever to stop the motor.
5.4 Safety functions of the chainsaw
(Fig.1)
1 SAW-CHAIN WITH LOW KICKBACK helps you with
specially developed safety devices to reduce kickback
forces so you can absorb them better.
3 FRONT HAND GUARD protects the left hand of the
operator if it slides off the front handle when the saw is
running.
3 CHAIN BRAKE is a safety function to reduce inju-
ry based on kickback by stopping a running saw-chain
within milliseconds. It is activated by the FRONT HAND
GUARD.
8 THROTTLE TRIGGER LOCKOUT prevents acciden-
tal acceleration of the motor. The throttle can be activat-
ed only when the throttle trigger interlock is pressed.
11 ON/OFF SWITCH immediately stops the motor when
it is switched off. The stop switch must be turned to ON
to start the motor (again).
18 CHAIN CATCHER reduces the risk of injury if the
saw-chain breaks or slips when the motor is running.
The chain catcher is designed to catch a flailing chain.
m NOTICE
Familiarise yourself with the saw and its components.
5.5 Warning notices for chainsaws
• When the saw is running, keep all body parts away
from the saw-chain. Before starting the saw, en-
) are sure that nothing touches the saw-chain. When
pA
working with a chainsaw, a moment of carelessness
can cause clothing or body parts to be caught by the
saw-chain.
• Do not work with this chainsaw on a tree unless
you are especially trained for this. In the event of
improper use of a chainsaw on a tree, there is a risk
of injury.
GB 35