Herunterladen Diese Seite drucken

Safety; Safety Instructions - Bartscher 825131 Bedienungsanleitung

Gasterrassenheizer, fahrbar

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Read these instructions before using and keep
them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of information
and reference guide. Awareness of the safety instructions and instructions for use in this
manual will ensure the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.

1.Safety

This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All people using the device should follow the instructions and tips contained in these
instructions.

1.1 Safety instructions

Always change the gas cylinder in a well ventilated area, away from any inflammation
sources.
The cylinder must always be stored outdoors or in a well ventilated area.
Indoor storage of this appliance is permissible only if gas cylinder is disconnected and
removed from the appliance.
Do not attempt to alter the appliance in any manner. Do not paint the radiant screen,
control panel or reflector.
The appliance must be installed and gas cylinder stored in accordance with local gas
fitting regulations.
Shut off the valve at the gas cylinder or the regulator before moving the appliance.
Use only the type of gas specified by the manufacturer.
Check that the regulator seal is correctly fitted and able to fulfil its function.
Close the gas supply at the valve of the gas cylinder or the regulator after use.
- 20 -

Werbung

loading