Restore Factory Settings - HomeMatic HmIP-SPI Montage- Und Bedienungsanleitung

1x long red
lighting
6x long red
flashing
1x orange
and 1 x green
lighting (after
inserting bat-
teries)
Long and short
orange flashing
(alternating)
10

Restore factory settings

The factory settings of the device can be restored.
If you do this, you will lose all your settings.
Transmission
failed or duty
cycle limit is
reached
Device de-
fective
Test display
Device soft-
ware update
(OTAU)
Restore factory settings
Please try again
(see sec. „9.2
Command not
confirmed" on page
34 or „9.3 Duty
cycle" on page
35).
Please see your app
for error message
or contact your
retailer.
Once the test dis-
play has stopped,
you can continue.
Wait until the up-
date is completed.
37