4.5 Satellite dish parking
Press button (6) to park the satellite dish
This operation must be performed before switching the power off and it brings
the satellite dish to its parked and travel position.
If the button controlling this operation is pressed, the green LED starts flashing
and will flash for all the time required for the closure of the satellite dish. The green
LED will turn off when the closure of the dish is complete. In the display version
the message (closure in progress) will appear.
4.6 Switching off
Switch off the satellite dish by pressing the ON / OFF button (3) and holding it for about 5
seconds.
CAUTION !!! Before switching off your satellite system by pressing button (3), make
sure that the satellite dish is in parking position (button 6) .
If you switch off the satellite dish when it is not in the parked position, it will stay
in the position it was before switching it off. The satellite dish will be brought back to its
parked position by turning the vehicle ignition key, provided that the green cable has
been correctly connected with + 12 V generated when the ignition key is turned.
17
I N N O VAT I O N S
FOR MOBILE LIFE