1197-20.960.02_18.11.2011_GARDENA.qxp 22.11.2011 12:17 Seite 14
6. Putting into Storage
Storage /
storage during winter :
7. Maintenance
Clean filter and viewing
window :
6
Rinse Water Distributor :
8. Troubleshooting
14
ATTENTION !
Water Distributor may be damaged as the
A
product is not frost-resistant !
V Protect the Water Distributor against frost.
1. Loosen connections.
2. If required, unlock Water Distributor and remove from the
mounting plate.
3. Store Water Distributor in a dry, frost-protected place.
The storage location must be out of reach for children.
Regularly check the filter.
1. Unscrew Tap Connector
2. Remove filter
5
3. Screw Tap Connector
3
5
with filter
the connection on the
6
inlet side
4. Press catch
0
window
remove viewing window
and clean it.
5. Refit viewing window
A dirty Water Distributor can affect the switch mechanism.
We recommend rinsing the Water Distributor once a year.
1. Set all flow levers on On and remove the end caps.
2. Open the water tap or set Water Computer to manual irrigation.
3. After 30 sec., press dial disc so that next outlet will be rinsed
out.
4. Repeat Number 3 for all outlets.
ATTENTION !
If the programmes are not correctly matched to the outlets
then significant damage can result through over-watering
or drying-out as the programmes will then be carried out
through the incorrect outlets !
V Make sure that the programmes are correctly matched
up to the outlets.
3
.
0
5
and clean.
3
back on to
.
B
on viewing
upwards,
0
.
B