B Analog In/Out Jacks; C Midi In/Out Terminals - Yamaha mLAN8P Bedienungsanleitung

Names and Functions
Rear Panel
A
CONTRAST
A CONTRAST
This knob is used to adjust the contrast of
the LCD on the top panel.

B ANALOG IN/OUT jacks

These jacks are used to input and output
analog audio signals. They are also called
A/D In and D/A Out respectively, since sig-
nals input at ANALOG IN are digitally pro-
cessed.

C MIDI IN/OUT terminals

These terminals are used to connect MIDI
devices and transmit and receive MIDI infor-
mation.
10
B
ANALOG
OUT2/R OUT1/L IN2/R
DC IN COAXIAL OPTICAL
OUT IN OUT
E F
OUT-B OUT-A
IN1/L
mLAN
IN 3
G
D SERIAL I/O jack
This jack is used to connect the mLAN8P
directly to a personal computer via a serial
cable. Use this jack to connect the mLAN8P
and the computer when you are using the
mLAN Patchbay and mLAN Mixer on Win-
dows. This is not used to input or output
MIDI and audio signals. Refer to page 13 for
more information on the connections.
E DC IN jack
This jack is used to connect the included
power supply adaptor (PA-5C).
Do not attempt to use an AC adaptor other
than the Yamaha PA-5C or an equivalent
recommended by Yamaha. The use of an
incompatible adaptor may cause irrepara-
ble damage to the mLAN8P, and may even
pose a serious shock hazard! ALWAYS
UNPLUG THE AC ADAPTOR FROM THE
AC
mLAN8P IS NOT IN USE.
C D
MIDI SERIAL I/O
IN
IEEE1394 S200
2 1
RT/ERR
H I J
POWER OUTLET
ACTIVE
WHEN THE