Settings Menu - Conrad 67 28 64 Bedienungsanleitung

d) Settings Menu
After calling of the main menu and selection of the function "Setting menu" (see chapter 11. a), the corresponding
display appears (it depends on the language set):
• Use the arrows " " or " " to select the desired submenu.
• Confirm your selection of the submenu with the button "ENTER" (or briefly push the 5-directional button on the rear
of the weather station).
• To leave the setting menu, push the button "EXIT" of the IR remote control (alternatively, push the button "Menu"
on the rear of the weather station).
The following settings can be made in the submenus:

Selection within a sub function is possible via the arrows; confirm the setting with "ENTER" (or by briefly
pushing the 5-directional button on the rear of the weather station).
To leave the submenu without changes, push the button "EXIT" of the IR remote control (alternatively,
push the button "Menu" on the rear of the weather station.
1. Submenu "Language"
The desired display language can be selected here.
2. Submenu "Slide Interval"
Set the duration for which each picture in the slide show is displayed. You may set a time of 5, 10, 30 or 60 seconds.
3. Submenu "File Description"
Switch the file description on or off.
With the file description on, the file name of the picture (e.g. "IMG_1234") and the picture number or total number
of present pictures (e.g. "0003/0115") are later displayed during the slide show.

Push the button "ENTER" during the slide show to display the file description or continue the slide show.
This way, you can find out the file name of a specific picture, for example.
39