Candy CIE4630B3 Gebrauchsanleitung Seite 5

Instructions for Use
Preparation before using:
When the power is switched on, the buzzer will
sound once and all the indicators will come on
for one second and then go out. The hob is now
in standby mode.
Place the pan in the centre of the cooking zone.
Operating instructions
When the ON/OFF key is pressed, all the
indicators show "-". Select the power level by
pressing the "+" or "-" key for the relevant
hotplate. To begin with the indicator shows "5".
Adjust up or down by pressing the "+" or "-" key.
If you press the "+" and "-" keys simultaneously,
the power setting returns to "0" ,and the cooking
zone switches off.
See the table on Page 6 for the power specific
to each cooking zone.
NB: When the ON/OFF key is pressed, the
induction hob returns to standby mode if no
other operation is carried out within one minute.
Boost mode
To heat up more quickly, press "BOOST" after
selecting the cooking zone, with the power level
indicator showing "P".
NB:
1. The boost function only operates for 5 minutes,
after which the cooking zone returns to its
orginal setting.
2. The boost function works on the all cooking
zones.
Aj k_\ Yffjk ]leZk`fe f] k_\ 6
e[
`j XZk`mXk\[1 k_\ 7
le[\i c\m\c 7 XlkfdXk`ZXccp1 m`Z\ m\ijX3 Aj k_\
Yffjk ]leZk`fe f] k_\ 8
k_
XZk`mXk\[1 k_\ 9 Zffb`e^ qfe\ `j c`d`k\[ le[\i
c\m\c 7 XlkfdXk`ZXccp1 m`Z\ m\ijX3
Cancelling the "BOOST" mode
When in the " Boost " mode, Select the
corresponding cooking zone and press the
"Boost" key or the "-" to cancel the Boost mode,
then the cooking zone will revert to its original
setting.
Timing function
Press the "+" or "-" key of that zone, the
corresponding indicator will be flashing. To
activate timer function by press the "+" or "-"
of timer key,the set time is between 1 and 99
minutes. Pressing the "+" of the timer key once
the time will increase by one minute. Keeping
on the "+" of timer key,the time will increase by
10 minutes,If the setting time exceeds 99
minutes,it will automatically return to "0" minutes.
Same logic for "-".
Timing confirmation
1.Pressing the "+" or "-" of the timer key,the time
can be set now.
2.When the timing indicator has been flashing
for 5 seconds, the set time will be automatically
confirmed.
5
jk
Zffb`e^ qfe\
Zffb`e^ qfe\ `j c`d`k\[
i[
Zffb`e^ qfe\ `j