WANDERS Véro Gebrauchsanweisung Und Montage Vorschriften Seite 23

5. Take the base from the box.
6. Refasten the base with the 4 screws.
7. Put the stove in an upright position. (Mind your
back!)
8. Put the stove in the right place and make sure
that it is positioned right beneath the
chimney.
9. Now connect the flue tube. The flue tube must be
connected overlappingly, with the upper sections
fitting into the lower sections.
Fasten the base
Mounting the suspended model:
. Check the packing. If you detect any visible dam-
age, please notify the supplier.
. The suspension bracket is placed in the back of the
box.
. Fasten the suspension bracket to the wall, but do
not use any synthetic fasteners.
Be sure to place the bracket exactly beneath the
centre of the outlet and to let the hooks face up-
ward. The fastening bolts should not protrude more
than 0 mm from the wall, as they will get in the
way when you hang the stove.
4. Hang the stove in the bracket. (Please mind your
back!)
5. Now mount the flue tubes. The flue tubes must be
placed overlappingly, with the upper sections fitting
into the lower sections.
Built-in version:
To install the insert model one needs to remove the 4
attached strips on each corner.
WANDERS recommends to add extra air inlets with all
built in stoves