English - Black & Decker RT650 Bedienungsanleitung

ROTARY TOOL RT650
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
EC DECLARATION OF CONFORMITY
RT650
Black & Decker declares that these
products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC,
EN 50144, EN 55014, EN 60555
Level of sound pressure, measured according to
EN 50144:
L (sound pressure) dB(A)
pA
L (acoustic power) dB(A)
WA
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50144:
Colin Wills
Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
RT650_EUR.PM5
Your Black & Decker rotary tool RT650 has been
designed for the following applications using the
appropriate accessories:
- Drilling in wood, metal and plastics
- Cutting wood, metal and plastics
- Engraving and shaping wood, metal,
plastics and fibreglass
- Polishing metal, glass and stone
- Grinding metal, glass and ceramics
- Sharpening metal
- Sanding wood and fibreglass
- Removing rust and corrosion from metal
This tool is intended for consumer use only.
RT650 Warning symbols
66.8
The following symbols are used in this manual:
79.9
RT650
2
1.4 m/s
Know your tool
5
E N G L I S H
INTENDED USE
SAFETY INSTRUCTIONS
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Warning! When using mains-powered
tools, basic safety precautions, including
the following, should always be followed
to reduce the risk of fire, electric shock,
personal injury and material damage.
Read all of this manual carefully before
operating the tool.
Before operating the tool, make sure
that you know how to switch the tool off
in an emergency.
Retain this manual for future reference.
13-11-2000, 15:12
5