Specifications - WimTec SanTec SMART Serie Montage- Und Bedienungsanleitung

Specifications

SanTec SMART 9 V:
Battery:
Battery life:
SanTec SMART 230 V:
Operating voltage:
Power consumption:
Further technical specifications:
Active range:
Flushing:
Flushing stop:
Stagnation rinse:
Continuous flow:
Cleaning stopp:
Flow rate:
Static pressure:
Water temperature:
Flow rate:
Water connection:
Connection hoses:
Noise class:
Dimensions in mm
Ø 50
SMART
9 V Alkali 6LR22 or 6LF22 (in scope of supply) optional 6 V Lithium CR-P2
9 V Alkali – approx. 100.000 flushings (max. 2 years)
6 V Lithium – approx. 200.000 flushings (max. 4 years)
230 V / 50 Hz
max. 0.2 W
automatic
as long as user is in active range
set to 1 min by default (configurable from 30 s - 10 min)
for 10 s to 20 s (configurable) when not in use for 3–48 h
(configurable, set to 48 h by default)
set to 1 min by default (configurable from 30 s - 10 min)
3 min (switchable)
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 0,8 MPa (8 bar)
max. 70 °C (max. 80 °C for max. 10 min)
6 l/min (independent of pressure)
G 3/8" IT
approved by DVGW W 270 and DVGW W 543
I
134
Ø 33
100
Reflux preventer
with pre-filter
30°
Washbasin fitting
EN
SanTec SMART
13